How much does it cost to repipe a house?
Repiping a house costs $1,500 to $15,000 in 2026. What changes your price is below.
Most homeowners pay about $7,500 to repipe a house, in Angi's data. A single fixture averages about $1,200. The pipe you choose moves the price most: a 2026 plumber's guide puts a whole house PEX repipe at $4,000 to $8,000 and copper at $8,000 to $15,000. About 75 percent of the bill is labor.

Estimate the cost to repipe a house
Pick what you need and add your ZIP. The price updates as you go. Got a price already? Check it in the last step.
Is this price fair?
A fair price is $4,000 to $8,000.
Type a price above to check it.
Middle of the range: $6,000
What you are paying for
How we calculate this
Prices are for the United States in 2026 from published cost guides, checked September 2026. This is an estimate, not a quote.
Cost by pipe and scope
| Whole house, average | About $7,500. Range $1,500 to $15,000 (Angi). |
|---|---|
| Whole house in PEX | $4,000 to $8,000 (1-800-Plumber, 2026). |
| Whole house in copper | $8,000 to $15,000. |
| One fixture | About $1,200 per fixture, depending on how much pipe it needs. |
| Labor share | About 75 percent of the total. |
Is your quote fair?
Type the price you were quoted. We compare it to the usual 2026 range of $1,500 to $15,000.
What pushes a quote up
| Pipe material | Copper costs far more than PEX in material and in labor. |
|---|---|
| Number of fixtures | Each bathroom, kitchen and laundry adds runs. |
| Stories and access | Slab homes and finished walls take more work than an open crawl space or basement. |
| Wall repair | Drywall patching and paint are often a separate line. |
| Permits | Most cities require a permit and an inspection. |
Repipe a house cost by region
| Lower cost states | $3,200 to $6,400. Alabama, Arkansas, Indiana, Iowa, Kansas, Kentucky, Mississippi, Missouri, Oklahoma, Tennessee, West Virginia and most rural areas. |
|---|---|
| Average cost states | $4,000 to $8,000. Arizona, Florida, Georgia, Michigan, North Carolina, Ohio, Pennsylvania, Texas, Virginia and most mid size cities. |
| Higher cost states | $5,200 to $10,400. California, Connecticut, Hawaii, Massachusetts, New Jersey, New York, Washington, plus big metros such as Chicago, Denver and Washington DC. |
These rows are our estimate. We took the typical national range and adjusted it for local labor costs, which run about 20 percent lower in the cheapest states and about 30 percent higher in the dearest ones. Because about three quarters of this job is labor, local plumber rates matter more than the pipe.
PEX or copper, and signs you need a repipe
PEX is plastic tubing that bends around corners and needs fewer fittings, so it goes in faster and costs less. 1-800-Plumber's 2026 guide notes that PEX resists scale and chlorine and runs quietly, but it cannot be used outdoors because sunlight damages it. Copper is the traditional choice. It is naturally antimicrobial and fully recyclable and can last up to 70 years in the right conditions, but its price swings and it takes skilled soldering.
When a repipe makes sense
Angi's guide points to frequent plumbing repairs as a common reason. Other signs are rusty or discolored water, low pressure throughout the house, repeated pinhole leaks, and old galvanized steel or polybutylene pipe. If you are remodeling and moving fixtures, it is often the right time too.
A repipe is a big number, but repeated leak repairs and water damage add up fast. Compare the quote with what you have spent on plumbing repairs in the last two years.
Why this costs more in 2026
Copper is a traded metal and its price moves with markets, and every run of pipe is priced at this year's plumber labor rates.
Diesel passed $6 a gallon on the AAA national average for the first time on September 11, 2026 (CBS 8 reporting AAA). Builders also paid 4.8 percent more for materials in a year (Roofing Contractor). Ask how long your quote is good for.
How to judge the quote in your hand
- Ask PEX or copper, and why.
- Ask if drywall repair is included.
- Ask how many fixtures the price covers.
- Ask about the permit and inspection.
- Ask how long the water will be off.
Ways to pay less
- Choose PEX where your code allows it.
- Do it during a remodel when walls are open.
- Do your own drywall patching and paint.
- Get three quotes. Labor is most of the bill.
Is ChatGPT sending your customers to a competitor?
You focus on being the best. We make sure AI knows it, and names you.
See if you qualify15 minutes. No cost. One company per trade per town.90 day money back guarantee if you don't get more customers.
Common questions
How much does it cost to repipe a house?
$1,500 to $15,000, about $7,500 on average.
How much does it cost to repipe a house with PEX?
About $4,000 to $8,000 for a whole house in 2026.
Is copper or PEX better?
PEX is cheaper and faster to install. Copper costs more but can last up to 70 years.
How long does a repipe take?
Most homes take a few days, depending on size and access.
Other jobs and rates
Compare prices
Related jobs people check next, with the usual 2026 price.
| Job | Usual price |
|---|---|
| Whole house water filtration system cost | $850 to $5,400 |
| Building a house cost | $140K to $800K |
| Cost to rewire a house | $10K to $20K |
| Whole house humidifier installation cost | $400 to $1,200 |