How much does electrical panel replacement cost?
Electrical panel replacement costs $800 to $3,000 in 2026. What changes your price is below.
The national average is about $1,800. A 100 amp panel runs about $800 to $1,000. Upgrading to 200 amps runs $1,500 to $3,000. If the utility line to the house has to be upgraded too, the cost can more than double, and reach $5,000 or more.
Estimate your electrical panel replacement cost
Pick what you need and add your ZIP. The price updates as you go. Got a price already? Check it in the last step.
Is this price fair?
A fair price is $800 to $2,500.
Type a price above to check it.
Middle of the range: $1,650
What you are paying for
How we calculate this
Prices are for the United States in 2026 from published cost guides, checked September 2026. This is an estimate, not a quote.
Cost by panel size
| 100 amp panel | About $800 to $1,000. |
|---|---|
| Typical replacement or upgrade | $800 to $2,500, about $1,800. |
| New 200 amp panel | $1,800 to $3,000. |
| 200 amp upgrade | $1,500 to $3,000, depending on what else is needed. |
| Service line upgrade too | Can more than double the cost. Up to about $5,000 from a 150 amp line. |
Is your quote fair?
Type the price you were quoted. We compare it to the usual 2026 range of $800 to $3,000.
What pushes a quote up
| Amps | 100, 150, 200 and 400 amp panels are different prices. |
|---|---|
| Service line | If the utility has to upgrade the line, cost jumps. |
| Meter base | Often replaced with a service upgrade. |
| Code updates | New panels may need new grounding and breakers. |
| Permit and inspection | Always required. |
Electrical panel replacement cost by region
| Lower cost states | $650 to $2,400. Alabama, Arkansas, Indiana, Iowa, Kansas, Kentucky, Mississippi, Missouri, Oklahoma, Tennessee, West Virginia and most rural areas. |
|---|---|
| Average cost states | $800 to $3,000. Arizona, Florida, Georgia, Michigan, North Carolina, Ohio, Pennsylvania, Texas, Virginia and most mid size cities. |
| Higher cost states | $1,050 to $3,900. California, Connecticut, Hawaii, Massachusetts, New Jersey, New York, Washington, plus big metros such as Chicago, Denver and Washington DC. |
These rows are our estimate. We took the typical national range and adjusted it for local labor costs, which run about 20 percent lower in the cheapest states and about 30 percent higher in the dearest ones. Big city permits and union labor put some metros at the top of the range.
Why a panel comes first for heat pumps, EVs and generators
Many 2026 projects start at the panel. A heat pump, an EV charger, an induction range or a standby generator can all need more capacity than an older 100 amp panel has. Inch Calculator notes that homes larger than about 1,800 square feet typically need at least 200 amps, and many older homes have 100 to 150.
If you are planning one of those projects, have an electrician do a load calculation first. It may show your panel is fine, or that you need a 200 amp upgrade before anything else. See our heat pump cost and whole house generator cost pages.
Call the utility early
Before a 200 amp upgrade, the electric company has to confirm the line to your house can carry it. If it cannot, the job can more than double, and the utility sets the schedule. Ask your electrician to check this in the first visit.
Why this costs more in 2026
Panels, breakers and copper wire follow metal prices, and copper wire and cable prices were up about 22 percent in a year, according to one 2026 contractor report.
Every truck trip costs more now. Diesel passed $6 a gallon in September 2026 (CBS 8 reporting AAA), and material costs rose 4.8 percent in a year (Roofing Contractor). Quotes may only hold for a few weeks.
How to judge the quote in your hand
- Ask for a load calculation.
- Ask if the utility line needs an upgrade.
- Check the meter base. Included or extra.
- Check the permit.
- Get the panel brand and breaker count.
Ways to pay less
- Upgrade once. Plan for future loads now.
- Bundle projects. Do the panel with the heat pump or EV charger.
- Get two licensed electricians' quotes.
- Check utility incentives for electrification.
Is ChatGPT sending your customers to a competitor?
You focus on being the best. We make sure AI knows it, and names you.
See if you qualify15 minutes. No cost. One company per trade per town.90 day money back guarantee if you don't get more customers.
Common questions
How much does it cost to replace an electrical panel?
$800 to $3,000, about $1,800 on average.
How much is a 200 amp panel upgrade?
$1,500 to $3,000, and up to about $5,000 if the service line needs upgrading.
Do I need a permit to replace an electrical panel?
Yes. Panel work needs a permit and inspection.
Do I need 200 amps?
Homes over about 1,800 square feet typically need at least 200 amps.
Do I need a new panel for a heat pump?
Often, if you have 100 amps. A load calculation will tell you.
Other jobs and rates
Compare prices
Related jobs people check next, with the usual 2026 price.
| Job | Usual price |
|---|---|
| Electrical panel upgrade cost | $520 to $4,500 |
| Solar panel repair cost | $228 to $1,501 |
| Electrical repair cost | $50 to $1,000 |
| Outlet repair cost | $60 to $250 |